Parker CPITM / A-LOK® Instrumentation Tube Fittings are designed as leak-free connections for process, power and instrumentation applications. These single and two ferrule fittings are manufactured to the highest quality standards and are available in a broad range of sizes, materials and configurations.
The Parker CPITM / A-LOK® tube fitting has been specifically designed for use on instrumentation, process and control systems, analysers and environmental equipment employed in chemical, petroleum, power generating and pulp and paper plants. CPITM / A-LOK® fittings have also been used extensively in other applications and industries wherever high reliability and quality are required.
Parker CPITM / A-LOK® fittings are available as stan- dard in Heat Code Traceable, 316 stainless steel. Other materials include steel, brass, aluminum, nickel-copper, Hastelloy C®, Alloy 600, Titanium, 6Mo, Incoloy 625 and 825. Straight fittings are machined from cold finished bar stock and shaped bodies are machined from close grain forgings. The raw materials used fully conform to the chemical requirements listed in Specification Table 1 found on page 6. For nuclear and other critical applications, stainless steel CPITM / A-LOK® fittings are readily available with documented heat code traceability.
Parker Hannifin MPI Fittings* have been engineered and manufactured to provide secure, tight, and leak resistant connections throughout industry, including off-shore oil and gas exploration platforms, research labs ,and other facilities that require operating pressures in the range of 6,000 to 15,000 psi.
High Pressure Equipment Company has developed an extensive line of components and systems designed to satisfy the unique requirements of elevated pressure applications, High Pressure Valves, Fittings and Tubing - 30,000, 40,000 and 60,000 psi service, valves, fittings- unions, bulkheads, caps, line filters, check valves, safety heads, rupture discs, anti-vibration gland assemblies, tubing coned and threaded nipples.
Autoclave Engineers, now part of the Instrumentation Products Division of Parker Hannifin, Autoclave Engineers was always the right decision for High Pressure, now that we are with Parker, Low Pressure Instrumentation Products to 15,000 psi, Medium Pressure to 20,000 psi, High Pressure to 60,000 psi and Air Driven Liquid Pumps and Packaged Systems to 60,000 psi.
Hydraulic and Instrumentation Tubes, Sandvik is a leading manufacturer of seamless tube and pipe in an extensive program of stainless steels, nickel alloys, titanium, zirconium and other advanced materials. Sizes range from 0.5 to 260 mm.
Tube Fabricating Equipment At Parker, we feel that the correct tube selection and installation are key ingredients to building leakfree, reliable systems. Within this catalog is a full compliment of tube cutters, deburring, bending, and assembly equipment for use in installing tubing systems in all types of materials.
Parker offers needle valves for positive leak-tight shut-off and regulation of liquids and gases, in a variety of stem types, in both in-line and angle patterns. Several designs are provided for oil and gas processing facilities, along with a PFA product for use in aggressive chemical and gas applications.
Parker supplies a comprehensive line of ball valves that control flow direction and provide shut off, with port configurations that support a diverse range of system requirements. Available in stainless steel, PFTE, steel and brass, these ball valves offer a variety of seat and seal materials.
Parker Check Valves are designed for flow control of fluids and gases in industries such as chemical processing, oil and gas production and transmission, pharmaceutical, pulp and paper, power and utilities.
Parker FT Series Tee Filters are designed for protection of instrumentation systems from undesirable materials, Component changes or repair and maintenance can admit dirt,chips or other contaminants to the small bore tubing.
Parker Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by the spring, the lower stem opens, permitting flow through the valve. Flow through the valve increases proportionately to the increase in upstream pressure.
Winters Instruments has been manufacturing quality built instrumentation for all markets that require pressure measurement, StabiliZRTM gauges are dry gauges that come with a StabiliZRTM dampened movement that eliminates pointer flutter caused by vibration and pulsation, Pressure gauges Model PFP, PFQ, PPC, PRC, PSG, PTR, Etc
Parker's manifold valve offers superior performance with a comprehensive range of remote and direct mount manifolds to suit all types of instrumentation nstallations, specifications and applications, Includes 2, 3 and 5 Valve Manifolds.
Servo valves and Servo-Proportional Valves are electro hydraulic, continuously acting valves that transform a changing analog or digital input signal into a stepless hydraulic output (flow or pressure).
The term servovalve describes a valve design with bushing spool assembly, characterized by high precision metering edges. The term servo-proportional describes valves with a spool-in-body design.Moog valves provide precise control of position, velocity, pressure and force.